Begin washing the bowl first and work up to the shallow end.
Florida Stucco Gem Finishes including Capri, Catalina, Sky Blue, Double Sky Blue, Blue Gem, Aqua Clear, Aqua Gem, Azure, Bone Gem, Emerald Sea, French Silver, Hawaiian, Lagoon and White Gem.
Prepare a slurry of cement and water or pump aid and run it through the pump first to prime the pump and lubricate the hoses.
Diamond Brite combines natural quartz aggregates and polymer modified cement in a stunning variety of colors.
It is important that the user follow these instructions carefully to ensure the most consistent color throughout the pool.Check mix water for metals, minerals, hardness, and alkalinity before use.
This makes sure the cement is properly hydrated to prevent delamination, bond failure, crazing, & structural cracking. Brush the pool walls and floor daily for the first two (2) weeks.Up to one (1) year from date of manufacture in an unopened properly stored container.To experience the rich, vibrant hues and textures of SGM Inc. warrants this product will perform in accordance with its intended use for a period of one year from the date of manufacture.
Following this procedure will minimize Remove all metal such as ladders and lights from the pool and turn off the circulation system.
Available in a variety of colors and textures. The technique of When the Diamond Brite has lost its sheen or is no longer damp, it may be ready for exposure with soft bristle brushes and water.
Washing too soon in these areas will cause washouts. Diamond Brite Exposed Aggregate Pool Finish. This ensures even distribution of aggregates and increases the working time of the plaster.
Insufficient mix time will result in uneven setting and shade variations.
Available in a variety of colors and textures.Examine pool surfaces to identify conditions that might interfere with the proper bonding of coating.
SGM Inc.‘s sole obligation will be to replace any product determined to be defective by SGM Inc.
Entering the pool once it is Water is part of the curing process of a new pool plaster finish. Standing water will weaken Diamond Brite and may cause washouts. Any claim for defective products must be submitted in writing to SGM Inc. and samples of the defect must be provided. After the 28 Day Start-Up Procedure has been performed, daily water chemistry should be maintained within the ‘ideal range.’You can use the LSI Calculator (Langelier Saturation Index) to determine if your water chemistry is balanced within the spectrum. This is an important quick guide to help you identify the signs & know when you should resurface your pool.If you live in Florida year-round, you probably don’t use your pool every day. Do not install automatic pool cleaners for twenty-eight (28) days. Over-cured cement paste will not remove easily and may require stiff bristle brushes to remove.
Starting with sunny or fast setting areas begin washing away cement paste with water and brushes.
Do not try to clear a blockage using the pump. Distribute the acid evenly throughout the pool.
We are in the process of building a pool and think diamond bright oyster quartz might be a great color. DIAMOND BRITE WATERCOLORS Two or more selectionsRead more Note: Hot, dry shells will cause the rapid setting of the plaster and result in check or shrinkage cracking and de-lamination.
Pour off the solution from the top being careful not to add impurities to the mix. The set time will vary according to temperature and humidity.
Once the scratch coat has become tacky, apply a finish coat to the entire pool surface beginning in bowl area and working toward the shallow end, troweling and blending walls and floor together to achieve a seamless appearance while working to a final thickness of 3/8″ to one-half inch (½”) (10 mm — 12 mm). Start the mixer and add Diamond Brite as quickly as possible to ensure that all the material has the proper mix time. Add a sequestering agent and raise the pH to the proper level with soda ash. Discard unmixed material (lumps). ! Look for algae, mold, mildew, dirt, paint, mortar droppings, efflorescence, patching compounds, loose tile, cracked plaster, et cetera.
Remove and repair all hollow and de-laminated plaster.
The result is a unique finish that stands up to the harshest pool environments while providing years of enjoyment. See available colors for Diamond Brite and Florida GEM Finishes on our website. Begin acid washing by using a 25% solution of muriatic acid (higher concentrations may be needed for stubborn areas) and water to remove the cement film that may remain on the surface. Avoid unnecessary stopping during the pumping process. This is accomplished by advancing the w… Keep some extra Diamond Brite mixed up for use in patching washout areas. Mar 6, 2017 - Explore Builders East Inc.'s board "Diamond Brite Pool Finishes" on Pinterest. Do not over-water mix.
As a rule of thumb, mix for only the amount of time required to produce a consistent, homogenous mix.
Thanks so much!! Darker colors can be affected by the Sun U/V rays and fade a bit over time, but they offer a dramatic effect to the look. Diamond Brite combines natural quartz aggregates and polymer modified cement in a stunning variety of colors. Mist these areas with water to allow longer exposure time.