Increase the reach of your pressure washer by up to 66 in. paint thinners, gasoline, oil, etc.Always prevent debris from being drawn into the unit by using a clean water source.This nozzle features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 80%.Bleach, Chlorine products and other corrosive chemicalsLiquids containing solvents (i.e., paint thinners, gasoline, oils)Store the accessories on the machine as shown in the picture below, in the following order:Before cleaning any surface, an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water.For additional cleaning tips and a complete video library, visit our website: Karcher’s 1800 PSI K3 Follow Me pressure washer is designed to “follow you” while you work. The use of other cleaning detergents may affect the operation of the machine and void the warranty.In a double-insulated product, two systems of insulation are provided instead of grounding. For best results, clean from top to bottom and from left to right.Optional accessories are available to further enhance your cleaning capabilities. Excellent for the application of detergent. Do not allow detergent or degreaser to dry on surface.
Direct connection via a receiver tank or backflow preventer, for example, is permitted.Dirt in the feed water will damage the unit. For best results, limit your work area to smaller sections of approximately 25 sq. For best results, clean from top to bottom and from left to right.Optional accessories are available to further enhance your cleaning capabilities.
The Kärcher ® pipe cleaning kit is the answer! Some of the cookies we use are essential for parts of the site to function correctly. Safety Alert Symbols. If needed, use a rotating wash brush (not included) to remove stubborn dirt. Attach the kit to your pressure washer, add abrasive material and attack the rust and paint with our ecofriendly alternative. paint thinners, gasoline, oil, etc.Always prevent debris from being drawn into the unit by using a clean water source.This nozzle features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 80%.Bleach, Chlorine products and other corrosive chemicalsLiquids containing solvents (i.e., paint thinners, gasoline, oils)Store the accessories on the machine as shown in the picture below, in the following order:Before cleaning any surface, an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water.For additional cleaning tips and a complete video library, visit our website: Be thoroughly familiar with the controls.Do not operate the product when fatigued or under the influence of alcohol or drugs.Do not overreach or stand on unstable support. Includes 4 aluminum sections for variable length. If using detergent, apply to surface at low pressure. ).Flow rate can be determined by running the water for one minute into an empty 5 gallon (20 litre) container.The water supply temperature must not exceed 40°C/104°F.Never use the pressure washer to draw in water contaminated with solvents, e.g. (1.67 m) fully assembled. These products can cause physical injuries to the operator and irreversible damage to the machine.Inspect cord before using – Do not use if cord is damaged.The Spray Gun Safety Lock prevents the spray from accidentally being engaged. Vous trouverez ici le mode d'emploi correspondant à chaque produit.
R J Bowers Distributors Inc. has in stock a very comprehensive line … Servicing a double insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. When moving on to a new section of the cleaning surface, be sure to overlap the previous section to eliminate stop marks and ensure a more even cleaning result. Do not allow detergent to dry on surface.To rinse, move the VPS out of "Mix" position and pull trigger to operate unit.Cleaning up: Always draw fresh water through the detergent tank or siphon tube when done to flush any remaining detergents from the injection system.For best results see Cleaning Tips for specific information on how to clean different surfaces.Kärcher ® biodegradable detergents are specially formulated to protect the environment and your pressure washer.